Brand: TORK CRAFT
Model: TCCH40022
TorkCraft - Hex Chisel 17MM Flat
Application:
For use in construction demolition & shaping!
Shank Type: 17mm Hex
Total Length: 22 x 400mm
Chisel Point Type: Flat
Assembly
Choose the required chisel for the job.
Pull the chuck back & insert the chisel in the demolition hammer.
Clean the chisel & the power tool after use, to prolong tool life.
WARNING: Using any tool can be dangerous, always select the right tool for the
job.
Always be aware of your su..
R 129.00
Ex VAT:R 112.17
Brand: TORK CRAFT
Model: TCCH40075
Flat Chisel
Diameter: 18mm
Length: 400mm
Blade Length: 75mm
The Tork Craft SDS Max Flat Chisel is for chiseling applications in masonry & concrete, has a flat . for
chiseling & stripping of wall/floor tiles, plaster etc. Compatible with SDS Max shank machines.
Application:
Contractor
Construction
Industrial
Demolitions
Strip tiles, breaking building materials & shaping.....
R 249.00
Ex VAT:R 216.52
Brand: TORK CRAFT
Model: TCDK009
DOWNLIGHTER INSTALLERS KIT 9PCE IN CASE....
R 269.00
Ex VAT:R 233.91
Brand: TORK CRAFT
Model: TCDK17
DOWNLIGHTER INSTALLERS KIT W/DR.SAWS 17PCE
Holesaw (12pce) – 19mm, 22mm, 29mm, 32mm, 38mm, 44mm,
51mm & 64mm
M&rel (1pce) – 9.5mm with 6mm pilot drill
M&rel (1pce) – 6.35mm
Wrench (1pce) – 2.5mm hex key wrench....
R 309.00
Ex VAT:R 268.70
Brand: TORK CRAFT
Model: TCDS002
Drill Stop Set- 5, 6, 8, 10, 11, 12mm & Allen Key
A drill stop is a device designed to prevent a drill bit from drilling too deeply. It's a collar that fits
around the drill bit & can be adjusted to a specific depth. When the drill bit reaches the depth set by the stop,
it encounters resistance, preventing it from going further.
Application:
DIY
Contracting
Woodworking
Dowel joining....
R 109.00
Ex VAT:R 94.78
Brand: TORK CRAFT
Model: TCDT008-01
TorkCraft - Decking Tool Kit
Diameter: 3.2 mm
CSK Diameter: 6.3 mm
CSK Angle: 45 Degrees
Hole Depth: 30 mm
Application:
The Tork Craft Decking Tool, the ultimate all-in-one pre-drilling countersink tool! Purpose built of decking & woodworking applications, especially where stainless steel screws are used. The single drilling countersinking action of the tool allows for an easier, quicker & more professional looking finish.
HSS Parabolic Bits for faster drilling
Decking..
R 559.00
Ex VAT:R 486.09
Brand: TORK CRAFT
Model: TCDT012-02
REPLACEMENT DRILL BITS 12G X 5PC FOR DECKING TOOL TCDT012-01....
R 279.00
Ex VAT:R 242.61
Brand: TORK CRAFT
Model: TCFB12
Forstner bits by Tork Craft
12mm Forstner bit
Drill pocket holes, flat bottom holes, etc. using any 10mm or larger portable
drill or stationary drill press. Forstner pattern bits are well known for their
ability to drill clean & chip-free holes in wood. Made of quality steel. Large
gullets milled in the tool body provide exceptional chip clearance.
Forstner Drill Bits bore precise, flat-bottomed holes in wood, in any
orientation with respect to the wood grain. They ca....
R 99.00
Ex VAT:R 86.09
Brand: TORK CRAFT
Model: TCFB38
Forstner bits by Tork Craft
38mm Forstner bit
Drill pocket holes, flat bottom holes, etc. using any 10mm or larger portable
drill or stationary drill press. Forstner pattern bits are well known for their
ability to drill clean & chip-free holes in wood. Made of quality steel. Large
gullets milled in the tool body provide exceptional chip clearance.
Forstner Drill Bits bore precise, flat-bottomed holes in wood, in any
orientation with respect to the wood grain. They ca....
R 199.00
Ex VAT:R 173.04
Brand: TORK CRAFT
Model: TCGD05
TorkCraft -
5mm Glass & Tile Drill Bit
Size: 5 mm
Carded Pack: Qty 1
Application:
For precision drilling in glass, mirrors, ceramic & marble tiles. If the
tile is on the wall, use a masonry bit to finish the hole once through the tile.
If the tile is on the wall use a masonry bit to finish the hole once through the
tile.
If drilling into extremely hard floor tiles or granite, choose the Tork Craft
Diamond drill, TC1808 series for better resul....
R 69.00
Ex VAT:R 60.00
Brand: TORK CRAFT
Model: TCGD06
TorkCraft -
6mm Glass & Tile Drill Bit
Size: 6 mm
Carded Pack: Qty 1
Application:
For precision drilling in glass, mirrors, ceramic & marble tiles. If the
tile is on the wall, use a masonry bit to finish the hole once through the tile.
If the tile is on the wall use a masonry bit to finish the hole once through the
tile.
If drilling into extremely hard floor tiles or granite, choose the Tork Craft
Diamond drill, TC1808 series for better resul....
R 79.00
Ex VAT:R 68.70